Booth 5000 (Modular Synths) at NAMM, Part 1

Our friends in the modular-synth world are moving up at NAMM, with a collective booth at the front of the show right near giants like Moog and Dave Smith Instruments.  It’s a bit much to take in all at once, as modules and module-makers continue to proliferate.  This will be the first of a few articles covering just this booth.

One new set of modules, and perhaps the oddest, comes from BASTL Instruments.

BASTL Instruments

In addition to the wood texture, there are modules that can control motors, solenoids and other outboard electronic elements.  It does bring to mind some ideas for sound installations and live performances.  You can hear a bit of these modules in this video.

Soulby presented Eurorack modular versions of 8-bit processing modules more messing with voice and other input signals.

Soulby

Delays and looping seem to be a thing this year. 4ms had a new looper and delay module whose novel feature is audio rate control of the functions for unusual flange delays and other continuous effects.

4ms

While the 4ms Spectral Multiband Resonator is not new for this year, it is still one I am excited about.

QuBit Electronix has a new sequencer module with a circular pattern; and a new polyphonic oscillator with individual controls and VCAs. You can see and hear both of them in this short video.

@qubitelectronix polyphonic oscillator in action! #namm

A video posted by CatSynth / Amanda C (@catsynth) on

Synthrotek is focusing on full systems, including a MIDI-CV converter that supports bi-directional clocks. One can use heavily modulated CV clocks to control time-based elements on MIDI synthesizers with this feature.

Synthrotek

And KOMA Elektronik returned with their massive sequencer, looking more refined. And it has a lot of lights!

KOMA Electronik Sequencer

More from this both and beyond in coming articles.

CatSynth at NAMM 2016

namm2016-catsynth

Once again, it’s that most glorious time of the new year when we CatSynth trek down to Anaheim, California for the NAMM show.  Synthesizers have been quite the thing the last couple of years, and we expect to see more that again this year.  Follow us here on the blog for detailed coverage, as well as on Twitter and Instagram for live coverage and photos!

NAMM: Synthrotek and Synthesis Technology

We finally come to the end of our exhaustive visit to the huge analog modular booth at NAMM. We of course had to pay our friends at Synthrotek a visit. They make DIY synthesis kits as well as full modules, often with a delightfully noisy quality. For example there is the aptly named DIRT Filter and the Chaos NAND of which we at CatSynth are quite fond. They had some new offerings for this year’s show.

20150124-IMG_3831

Among the new modules were a series that came from a collaboration with George Mattson. The MST and Synthrotek modules together form a complete analog synthesizer voice, with MIDI-to-CV, oscillator, filter, mixer, and modulations. There is even a classic Mattson-designed buffered multiple. Another interesting offering was the DS-M, a complete drum synth module with multiple “colors” of noise, built in oscillator, VCO and a voltage-based “velocity sensitivity.” It can create standard analog drum sounds, but can also do some rather unusual sounds as well. Like most products from Synthrotek, these can be ordered as raw kits, module-assembly kits (with panels, etc.), or as completed versions.

Nearby was Synthesis Technology, makers of the E-350 Morphing Terrarium that was among the first modules I bought back in 2012.

20150124-IMG_3830

Next to the e350 in the photo is an expander module from Manhattan Analog that opens up some additional functionality of the original module. Also pictured above the the E-102 Quad Temporal Shifter, basically a digital implementation of the Serge analog shift register. The E-560 thru-zero frequency shifter and ring modulator is quite interesting as well.

This concludes our reports from this year’s NAMM show. There was so much to see on the synthesizer front we were not able to get to it all, much less write about it. It was definitely one to remember, but we are looking forward to more next year!

meow meow bye namm 2015

NAMM: KOMA Eletronik, QuBit, 4ms

Today we continue with the panoply of synth module manufactures that we say at this year’s NAMM show.

One instrument that garnered quite a bit of attention (and deservedly) so was the new Komplex Sequencer from our friends at KOMA Eletronik.

KOMA Komplex Sequencer

First of all, it is sleek and beautiful. But it is also quite powerful. It features four independent 16-step sequencers supporting both MIDI and CV/Gate. The sequencers can each be set to play in one of five modes (forward, backward, ping-pong, ping-pong reversed, random); and CV can be quantized to various Western scales (for those who need such things in their music). The size of control and combined support for MIDI and CV would be a lot in itself. I am definitely looking forward to seeing this ship in the near future.

QuBit

Qu-bit Electronix presented some modules that are also going to be our “want” list. The Nubulae may not be new for 2015, but it seems extremely useful compositionally. It reads and renders audio files from a flash drive, but with CV-based control for speed, pitch, and granular synthesis. The NanoRand is a tiny module that packs four different randomization functions along with a bright multi-color LED (it’s that big purple light in the photo above). Switching among the four functions via a sequencer creates some very intriguing musical patterns.

Finally, we at CatSynth were quite interested in the new Spectral Filter from 4ms. It is a spectral multi band resonant filter that can sculpt and amplify sections of a signal to create harmonic (or inharmonic) structures.

4ms

A unique feature was the circular control that allows one to “rotate” around the spectrum. I found myself comparing this to the newly released additive synthesis module from Make Noise (you can read about it here. They are both spectral manipulators and can some similar in particular moments, though they approach and instrument architecture is quite different.

NAMM: Tiptop Audio, Delptronics, Hexinverter.net

In this article we focus on some of the rhythm and percussion modules that were shown at this year’s NAMM show.

tiptop audio

Tiptop Audio presented the Circadian Rhythm along with its well-known line of percussion synth modules. It is branded as a “rhythm composer” and a central element to a rhythmic modular system to work alongside the existing Trigger Riot module. They also had several Serge Eurorack modules. You can hear them all together in this video.

Nearby was Delptronics, makers of the popular TriggerMan module for sequencing and patterns. It pairs well with their drum modules, including the ThunderBell available in both Eurorack and cowbell form. The ThunderBell is now part of the system at CatSynth HQ.

20150124-IMG_3841

20150124-IMG_3842

Hexinverter.net makes a wide variety of modules, including popular kits for synth percussion such as “Mutant HiHats” and “Mutant Clap.” This year they introduced the Mutant Machine, which is a more generalized percussion synthesizer compared the earlier ones that each do a specialized instrument model. They also introduced Mutant Glue, an all-in-one mixer with compression, distortion, etc.

20150124-IMG_3837

I have traditionally shied away from drum synths in my analog modular systems until now, as the offerings and demos did show me that there are more esoteric possibilities than traditional electronic beats. Although as that first video suggests, those can be fun, too.

NAMM: Doepfer, Jomox, Black Market Modular, WMD, SSF

We pick up our post-NAMM coverage where we left off after the show. As stated in earlier articles, this was a great year for synthesizers, including analog modular synthesizers. For the first time, several manufacturers formed a super booth in Hall A in the main show floor.

Do you like synths?

Holding court in the center was Deiter Doepfer himself with a giant Doepfer modular system.

20150124-IMG_3827

The new modules from Doepfer this year included an opto FET filter (an alternative to the popular vactrol filters), a quadrature thru-zero VCO, and a large trigger sequencer. The trigger sequencer has a nice appearance and provides a lot of outputs. It plays well with a new clock divider that Doepfer introduced as well. The FET filter has some interesting properties for doing FM filter effects as it can modulate much faster, though it apparently distorts at higher volumes.

JoMoX has been long known for its small tabletop instruments. This year, like several other manufacturers, they introduced Eurorack modular versions, including the T-rackonizer filter matrix along with some of their drum synths.

20150124-IMG_3824

Black Market Modular collaborated with Foxtone Music to bring the Colour Pallete to the Eurorack modular format. It’s really a “modular inside a modular”, where one can mix and match up to three “colour palettes” (expansion cards) that operate as standalone modules, each with its own VCA. They hope to release more expansion cards over time, which will be compatible with their outboard system.

20150124-IMG_3828

Another interesting collaboration featured WMD and Steady-State Fate (SSF). There are some basic modulesl, but also some specialized sound and control elements such as the Spectrum and Mini Slew modules. And all of them can put together in this neat little case complete with keyboard that supports MIDI and CV.

20150124-IMG_3833

This is only the beginning of what was on display in the analog modular superbooth 6990. More will be presented in subsequent articles.

NAMM: Tom Oberheim SEM Eurorack Module

This year, Tom Oberheim joined his fellow giants in the synthesizer world Dave Smith, Don Buchla, and Roger Linn at NAMM. He has rereleased the classic SEM synthesizer and introduced a new Eurorack module based on the SEM.

Oberheim SEM Eurorack module

The EuroModule SEM is a single voice of the standalone synthesizer. It has two VCOs, a VCF, two envelopes, LFO, and VCA. It’s pretty much an entire instrument in one, and it takes up quite a bit of space in a modular system. Where I could see it being of particular use in this environment route external CV into it.

The Tom Oberheim booth (under the name of his company Marion Systems) was a family affair, and indeed the entire Oberheim family was extremely welcoming and friendly.

The SEM module as well as a separate Phaser module are expected to be released later this year.

NAMM: SpaceHarp

There is usually at least one completely out-there “what exactly is that” instrument at NAMM, and this year that was the SpaceHarp.

It is visually unique, looking a bit like something off the original Star Trek or other early science fiction. Each of the circles contains multiple optical and sonic sensors which respond when the performer moves and blocks the light from above. The input from the sensor arrays is converted to MIDI for controlling an external synthesizer. I’m not exactly sure what the large illuminated crystal does, but it adds the classic science-fiction quality of the instrument.

SpaceHarp at NAMM

I did make an attempt to play the SpaceHarp.

It was fun, though not quite as easy to control as the description suggests. Given all the degrees of freedom, it was quite different from a theremin (even an optical theremin) in the way one interacts with it.

At a technical and visual level, the SpaceHarp was interesting. While it didn’t come across as a “must have” for me, I can see others finding this a useful and creative tool for live performance. The tendency towards New-Age hyperbole in their product literature was a bit of a turn-off, suggesting a different target audience. But perhaps it just needs another chance with some harsher and more abstract sounds, like from one of the many analog modules at this year’s show.

NAMM: Roger Linn and the LinnStrument

Our visit to Roger Linn Design featured both the man himself as we as the LinnStrument.

Roger Linn

The LinnStrument is an expressive controller with a grid of continuous sensors that capture independent velocity, X, Y and Z-axis position for each of multiple touches. As such, it is an extremely expressive instrument that can afford control as dextrous as a traditional piano keyboard in some ways more versatile between all the degrees of freedom and abstract layout. It is also quite compact.

LinnStrument

While the LinnStrument is primarily MIDI, it would be interesting to see it in a CV-based environment as well.

We were also treated to a demo by Roger Linn, including several of the featured sounds and programs.

We definitely appreciate his time talking with us and showing his invention.

NAMM: New Korg Synths and ARP Odyssey clone

One of the big announcements before the show was Korg’s new clone of the ARP Odyssey. It was up there with the Moog Modular and Sequential Prophet 6. So I had to see and play this one for myself.

20150124-IMG_3784

Like most of Korg’s recent reissues of classic analog instruments, this version of the ARP Odyssey is about 80% the size of the originally. I’m not sure what it is with Korg making things “just a little smaller” than the original. But it did have the sound of the original – I tried, somewhat poorly, to play some lines from Head Hunters. And I was happy to see that had the original industrial design, including the Helvetica-style red lettering on black background that remains very distinctive. It would be interesting to play this along side my vintage Octave CAT. At just under $1000, it’s even possible one day.

Another new offering from Korg this year was the MS20-M kit, a kit variation on the MS-20. It was paired with the new and very compact SQ-1 CV sequencer.

MS20-M kit and SQ-1 sequencer

The MS-20M has no keyboard, but that’s not much of an impediment as one can control it via external CV.

At the small end of the spectrum there was the LittleBits SynthKit, a collaboration between Korg and LittleBits. We actually have one of these kits at CatSynth HQ.

LittleBits Synth Kit